• Details: 
• Full cover shell made from fibre glass
• Sleek design suitable for all type of rider
•  Wide angle visor cover up until your chin ​​​​​​
•  Double visor (sun visor)
•  Detachable padding easy for cleaning
•  Double string strap
•  Functional air vent in & out, closed or open

• TECHNOLOGY H+I+R+P. The HIRP (High Impact Resistant Polymer) Material is formulated by a polymer injected into very precise blocks to provide better properties such as lightness and impact resistance.
• “ECE” approved protection
• Sportcam support
• DOT approved protection

• special synthetic leather sewn for touch panel operation
• lateral carbon protection
• finger protector
• TPR rubber knuckle protection
• floating knuckle structure
• COOLMAX® panel
• reflective print for night safety
• velcro closure

Features

• High protection and snug fit mesh gloves
• 3D pattern
• A new type of rubber knuckle protector
• Inner finger protectors
• Carbon palm slider
• 3D mesh panel on palm
• Reflective panel on upper
• Reflective printed logo on finger
• Velcro cuff belt
• Conductive leather on finger tip
• Anti copy 4D label

・3D cutting: 3D cutting for enhanced mobility
・Mesh: Made of breathable mesh material
・Comes with an anti-counterfeit label that uses special hologram technology
・Smart Tip: The special material placed on the fingertips allows touch panel operation even with the gloves on
・3D Mesh
・Available season: Spring, Summer, Autumn

[Material]
・Outshell: polyester, nylon, spandex
・Polyester (membrane), polyurethane

[Protector] Knuckles

Protective rain glove with improved fitting and maneuverability.
Equipped with inner knuckle protectors.
Smartphone operation van be also done.

• A textile and mesh hoodie that is easy to match with any bike.
• The hood is removable.
• Materials : [Out shell] polyester, [lining] polyester
• Protectors : shoulder, elbow, back, chest
• Copy Protection : With anti-counterfeit label applying special hologram technology

・Shoulder, elbow and spine protectors are standard
・Mesh: Breathable mesh material is used
・Reflector: Equipped with reflectors to increase nighttime visibility
・Three-dimensional cutting: Three-dimensional cutting for enhanced mobility
・Chest protector standard: Chest protector SK-689, SK-619 or SK-682 standard
・Optional chest protector can be attached: optional single-piece chest protector can be attached
・Includes anti-counterfeiting label with special hologram technology
・CE standard EN1621-1 level 2: Protector that meets CE standard EN1621-1 (level 2) for elbow and knee protectors
・Comine CE Elbow / Knee
・Usable season: Spring / Summer

・Knee protectors are standard
・Reflector: Equipped with reflectors to increase nighttime visibility
・Three-dimensional cutting: Three-dimensional cutting for enhanced mobility
・Protector external insertion type
・Includes anti-counterfeiting label with special hologram technology
・CE standard EN1621-1 level 2: Protector that meets CE standard EN1621-1 (level 2) for elbow and knee protectors
・Usable season: Spring / Summer

•  

• Removable inner lining for easy cleaning
• Extra soft inner cushion providing sturdy yet comfortable hold
• Comes with Double D-Ring buckle
• 100% Genuine with SIRIM approved
• Double visor
• Inside-out air ventilation system with addition of 2-in-1 air ducts for a cool ride at all times
• High-speed aerodynamics

▶️Description

▸ Front shield attached to the helmet with a scratch-resistant coating. Made of Polycarbonate according to international standards. With a protective coating

▸ Built-in mounted spoiler, increase stability while driving at high speeds.

▸ Active air covered duvet set, quick to wear, removable and washable. ▸ Internal sponge produces a 3D contour shape curved face while wearing.

▸ Stepping Lock chin strap Lock is made of rust-free Stainless Steel.

▸ The shell of the hat is made of Shock resistant thermoplastic (SRT).

▸ Inside there is a headphone compartment. Supports the installation of Bluetooth devices

▸ Available in sizes from XS-XL ▸ Hat weight 1400 ± 50 grams

▸ Passed TIS 369-2557 and ECE R22.05 standards.

▶️Description

▸ Front shield attached to the helmet with a scratch-resistant coating. Made of Polycarbonate according to international standards. With a protective coating

▸ Built-in mounted spoiler, increase stability while driving at high speeds.

▸ Active air covered duvet set, quick to wear, removable and washable. ▸ Internal sponge produces a 3D contour shape curved face while wearing.

▸ Stepping Lock chin strap Lock is made of rust-free Stainless Steel.

▸ The shell of the hat is made of Shock resistant thermoplastic (SRT).

▸ Inside there is a headphone compartment. Supports the installation of Bluetooth devices

▸ Available in sizes from XS-XL ▸ Hat weight 1400 ± 50 grams

▸ Passed TIS 369-2557 and ECE R22.05 standards.

▶️Description

▸ Front shield attached to the helmet with a scratch-resistant coating. Made of Polycarbonate according to international standards. With a protective coating

▸ Built-in mounted spoiler, increase stability while driving at high speeds.

▸ Active air covered duvet set, quick to wear, removable and washable. ▸ Internal sponge produces a 3D contour shape curved face while wearing.

▸ Stepping Lock chin strap Lock is made of rust-free Stainless Steel.

▸ The shell of the hat is made of Shock resistant thermoplastic (SRT).

▸ Inside there is a headphone compartment. Supports the installation of Bluetooth devices

▸ Available in sizes from XS-XL ▸ Hat weight 1400 ± 50 grams

▸ Passed TIS 369-2557 and ECE R22.05 standards.

▶️Description

▸ Front shield attached to the helmet with a scratch-resistant coating. Made of Polycarbonate according to international standards. With a protective coating

▸ Built-in mounted spoiler, increase stability while driving at high speeds.

▸ Active air covered duvet set, quick to wear, removable and washable. ▸ Internal sponge produces a 3D contour shape curved face while wearing.

▸ Stepping Lock chin strap Lock is made of rust-free Stainless Steel.

▸ The shell of the hat is made of Shock resistant thermoplastic (SRT).

▸ Inside there is a headphone compartment. Supports the installation of Bluetooth devices

▸ Available in sizes from XS-XL ▸ Hat weight 1400 ± 50 grams

▸ Passed TIS 369-2557 and ECE R22.05 standards.

▶️Description

▸ Front shield attached to the helmet with a scratch-resistant coating. Made of Polycarbonate according to international standards. With a protective coating

▸ Built-in mounted spoiler, increase stability while driving at high speeds.

▸ Active air covered duvet set, quick to wear, removable and washable. ▸ Internal sponge produces a 3D contour shape curved face while wearing.

▸ Stepping Lock chin strap Lock is made of rust-free Stainless Steel.

▸ The shell of the hat is made of Shock resistant thermoplastic (SRT).

▸ Inside there is a headphone compartment. Supports the installation of Bluetooth devices

▸ Available in sizes from XS-XL ▸ Hat weight 1400 ± 50 grams

▸ Passed TIS 369-2557 and ECE R22.05 standards.

▶️Description

▸ Front shield attached to the helmet with a scratch-resistant coating. Made of Polycarbonate according to international standards. With a protective coating

▸ Built-in mounted spoiler, increase stability while driving at high speeds.

▸ Active air covered duvet set, quick to wear, removable and washable. ▸ Internal sponge produces a 3D contour shape curved face while wearing.

▸ Stepping Lock chin strap Lock is made of rust-free Stainless Steel.

▸ The shell of the hat is made of Shock resistant thermoplastic (SRT).

▸ Inside there is a headphone compartment. Supports the installation of Bluetooth devices

▸ Available in sizes from XS-XL ▸ Hat weight 1400 ± 50 grams

▸ Passed TIS 369-2557 and ECE R22.05 standards.

▶️Description

▸ Front shield attached to the helmet with a scratch-resistant coating. Made of Polycarbonate according to international standards. With a protective coating

▸ Built-in mounted spoiler, increase stability while driving at high speeds.

▸ Active air covered duvet set, quick to wear, removable and washable. ▸ Internal sponge produces a 3D contour shape curved face while wearing.

▸ Stepping Lock chin strap Lock is made of rust-free Stainless Steel.

▸ The shell of the hat is made of Shock resistant thermoplastic (SRT).

▸ Inside there is a headphone compartment. Supports the installation of Bluetooth devices

▸ Available in sizes from XS-XL ▸ Hat weight 1400 ± 50 grams

▸ Passed TIS 369-2557 and ECE R22.05 standards.

• Certified ECE 22.05 P/J
• 1700 ±50
• XS-3XL
• KPA
• 2 Shells
• Long Oval